Blog

Critical parts of your vending machine will need to be kept clean to avoid operation problems. A few minutes of cleaning on a regular basis is all it takes to ensure trouble free operation.

A cleaning routine will assist avoiding some common problems which can cause downtime and revenue loss;

• jammed coins,
• coins directed to the wrong tubes,
• incorrect or no change,
• notes being rejected,
• drinks not cold enough.

If you want the best performance from your vending machine then you should regularly clean these three critical components;

• coin mechanism
• note acceptor
• condenser

Coin Mechanism Cleaning

The coin mechanism sensors can become dirty over time. Jammed coins or coins being directed to the wrong tube is an indication that the sensors need cleaning.

Worldwide Vending recommend that sensors be cleaned every second time the coin mechanism is filled. This is easily accomplished using everyday glass cleaner and a soft cloth. The cleaning process is simple and takes only a few minutes.

The video below has been produced to provide you with the information required to clean the coin mechanism sensors on a Sorrento vending machine.

Note Acceptor Cleaning

As with the coin mechanism, it's good practice to clean the sensors on the note acceptor at least every second fill. Again, glass cleaner and a soft cloth are recommended for this cleaning.

The video below will show you how to clean the vending machine note acceptor fitted to your Sorrento vending machine.

Condenser Cleaning

It is very important to keep the condenser of your vending machine clean and free of dust. This will enable your machine to run at its maximum efficiency. If the drinks in the machine are not as cold as they should be it is a sign that the condenser may need cleaning.

Worldwide Vending recommend that condensers be cleaned at least every two (2) months if positioned on carpet, or every four (4) months if it is positioned on tiles or concrete. All that is required to clean the condenser is a household dustpan and brush.

Cleaning the condenser is the hardest part of your routine maintenance, but even that is relatively easy to do. The video below will show you how to clean the condenser on a Sorrento vending machine. Note that there are 8 screws in total. Don't forget the one hiding behind the cable.

A Little TLC is All it Takes

Routine cleaning only takes a few minutes to complete and it will certainly save some headaches down the track. Like all machines, a little Tender Loving Care provided to your vendor will significantly reduce the risk of lost income flow resulting from machine down time.

We are Here to Help

If you need any other assistance with this cleaning process, Worldwide Vending Technical support is always available to assist you on 1300 386 609.